EMC Certification E20-817 Exam

On February 26, 2009, In e20-817, By admin

Killtest Practice Exam for E20-817 is written to the highest standard of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your EMC Certification exam and get your EMC Certification Certification.
We guarantee your success in the first attempt. If you do not pass the EMC Certification “E20-817″ (Symmetrix Business Continuity Expert Exam for Storage Admins) on your first attempt, we will give you a FULL REFUND of your purchasing fee.

killtest EMC Certification E20-817 Exam Downloadable.
Printable Exams (in PDF format) Our Exam EMC Certification E20-817 Preparation Material provides you everything that you need to take your EMC Certification exam. The EMC Certification Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise and logical. You may get E20-817 exam questions from different web sites or books, but the logic is the key. Our Product will not only help you pass the Symmetrix Business Continuity Expert Exam for Storage Admins exam in first try, but also save your valuable time.

1. Click the Exhibit button.
During the design process of a Star implementation, a customer expresses the intention to switch
production to one of the target sites as part of a disaster drill. After the production has been switched, the
customer wishes to run Star protection at this site.
What should you advise?
A.It does not matter which site the customer switches production to, because Star protection cannot be
enabled when the workload is running at a target site.
B.Servers and management hosts may be provided at either site, because Star protection can be enabled
while the workload is running at either target site.
C.Servers and management hosts should be provided at site B, because Star protection can only be
enabled if the workload is switched to the Synchronous target site.
D.Servers and management hosts should be provided at site C, because Star protection can only be
enabled if the workload is switched to the Asynchronous target site.
Answer: C
2. A customer running SRDF/Star experienced a workload site failure. Production was switched from the
workload site A to the synchronous target site B. Some time later, site A came back online. Before switching production back to site A, a symdev show command is executed to examine the R1 devices at
site A.
What is the RDF configuration state that describes the relationship of the RDF devices between A and B?
A.Duplicate
B.Half
C.Normal
D.Partitioned
Answer: A

Tagged with:
 
0 Comments
Leave A Response

killtest E20-817 Exam Features

On February 22, 2009, In e20-817, By admin

VUE/Prometric Code：E20-817

Exam Name：Symmetrix Business Continuity Expert Exam for Storage Admins
Questions and Answers：519 Q&As
Price：$ 79
Updated：2009-02-18

Printable Exams (in PDF format) Our Exam E20-817 Preparation Material provides you everything you will need to take your EMC Certification exam. The EMC Certification Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get EMC Certification exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first EMC Certification exam try, but also save your valuable time .

  • Comprehensive questions with complete details about E20-817 exam.
  • E20-817 exam questions accompanied by exhibits.
  • Verified Answers Researched by Industry Experts and almost 100% correct.
  • Drag and Drop questions as experienced in the Real EMC Certification exam.
  • E20-817 exam questions updated on regular basis.
  • Like actual EMC Certification Certification exams, E20-817 exam preparation is in multiple-choice questions (MCQs).
  • Tested by many real EMC Certification exams before publishing.
  • Try free EMC Certification exam demo before you decide to buy it in http://www.Killtest.com.
Tagged with:
 
0 Comments
Leave A Response

High quality and Value for the e20-597 Exam

On February 19, 2009, In E20-597, By admin

Killtest Practice Exams for e20-597 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your Technology Foundations exam and get your Technology Foundations Certification.
We guarantee your success in the first attempt. If you do not pass the Technology Foundations e20-597 (Backup & Recovery Specialist Exam for Storage Administrators) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

killtest e20-597 Downloadable.
Printable Exams (in PDF format) Our Exam e20-597 Preparation Material provides you everything you will need to take your Technology Foundations exam. The Technology Foundations Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get Technology Foundations exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first Technology Foundations exam try, but also save your valuable time .

  • Comprehensive questions with complete details about e20-597 exam.
  • e20-597 exam questions accompanied by exhibits.
  • Verified Answers Researched by Industry Experts and almost 100% correct.
  • Drag and Drop questions as experienced in the Real Technology Foundations exam.
  • e20-597 exam questions updated on regular basis.
  • Like actual Technology Foundations Certification exams, e20-597 exam preparation is in multiple-choice questions (MCQs).
Tagged with:
 
0 Comments
Leave A Response

Technology Architect Solutions Design

On February 15, 2009, In E20-322, By admin

3. A customer decided to consolidate their storage onto a Symmetrix. They have a mix of Windows and
UNIX servers and want one copy of data for creating backups each night. They also want another copy to
be made during the day. This second copy will be a standby to perform a fast recovery in the event of data
corruption.
The initial survey of the customer environment shows that the read/write ratio of their application is 1. 2

during the day and 5. 1 at night. The application appears to be highly sensitive to disk response times
during the day.
Which initial solution should be considered?
A. TimeFinder/Clones for the standby copy and TimeFinder/Mirror BCVs for backups at night
B. TimeFinder/Snap for the standby copy and TimeFinder/Clone for backups at night
C. TimeFinder/Snap for the standby copy and TimeFinder/Mirror BCVs for backups at night
D. TimeFinder/Mirror BCVs for the standby copy and TimeFinder/Snaps for backups at night
Answer: D
4. A customer has implemented a second Brocade director into their environment. They have moved
several hosts and one of their two storage arrays onto the new director. When a large batch cycle was run,
the customer experienced queuing on the directors when previously there was none.
The customer discovered the following during their analysis of the issue.
The hosts running the batch cycle used storage from both arrays.
The only LUNs having problems came from the array attached to the new director.
When the batch process was rerun
with all LUNs made available through the original director, no
problems were encountered.
What would you recommend to solve the performance problem?
A. Add departmental switches to the fabric, creating a core/edge design
B. Change FSPF costs
C. Implement additional Brocade ISLs
D. Utilize Brocade ISL Trunking to optimize the ISL traffic
Answer: D

Tagged with:
 
0 Comments
Leave A Response

High quality and Value for the E20-322 Exam

On February 13, 2009, In E20-322, By admin

Killtest Practice Exams for E20-322 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your Technology Foundations exam and get your Technology Foundations Certification.
We guarantee your success in the first attempt. If you do not pass the Technology Foundations E20-322 (Technology Architect Solutions Design) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

killtest E20-322 Downloadable.
Printable Exams (in PDF format) Our Exam E20-322 Preparation Material provides you everything you will need to take your Technology Foundations exam. The Technology Foundations Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get Technology Foundations exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first Technology Foundations exam try, but also save your valuable time .

  • Comprehensive questions with complete details about E20-322 exam.
  • E20-322 exam questions accompanied by exhibits.
  • Verified Answers Researched by Industry Experts and almost 100% correct.
  • Drag and Drop questions as experienced in the Real Technology Foundations exam.
  • E20-322 exam questions updated on regular basis.
  • Like actual Technology Foundations Certification exams, E20-322 exam preparation is in multiple-choice questions (MCQs).
  • Tested by many real Technology Foundations exams before publishing.
  • Try free Technology Foundations exam demo before you decide to buy it in http://www.Killtest.com.

1. A customer is deploying a new Microsoft Exchange environment and has requested assistance with the
associated disk design. They are deploying Exchange for 850 users with an average of 3 I/Os per user.
They expect a 60% read and 40% write distribution.
The customer would like to know the number of disks required for both RAID 5 and RAID 1/0 DMX
configurations with 15k rpm drives. How many disks are required for each configuration type?
A. RAID 5 28 and RAID 1/0 18
B. RAID 5 31 and RAID 1/0 20
C. RAID 5 38 and RAID 1/0 24
D. RAID 5 43 and RAID 1/0 28
Answer: A
2. A customer plans to create two regional offices that are between 800 and 2,000 km away from their
main data center. Each regional office will have a data center that will serve four to six branch offices
between 30 and 50 km away.
At the close of business each evening the customer will shut down the application and transmit changes
to each regional office. The amount of new information sent from the head office each night will vary from
0.5 and 1.5 GB. Later each night, an application at the regional offices will read the data from the head
office and generate approximately 50 MB of new rate information appropriate for its branch offices.
What is the most costeffective
EMC solution?
A. 1. Configure CLARiiON arrays in each office.
2. Use MirrorView/A and T3 networks for all data transfers.
B. 1. Configure Symmetrix arrays in the head office and CLARiiONs in the regional offices.
2. Use OC3
networks to transmit the same master copy of data from the head office to the regional
offices using Open Replicator.
3. At the regional offices, create a snap of the data received and transmit the changes to the branch
offices using SAN Copy.
C. 1. Configure Symmetrix arrays at all the main data centers and CLARiiONs at the regional and branch
offices.
2. Use OC3
network links between the main data centers.
3. Use DS3
between the regional and branch offices.
4. Use SRDF/DM for data transfer in each case.
D. 1. Configure Symmetrix arrays at the head office and regional offices.
2. Configure CLARiiONs at the branch offices.
3. Use SRDF/DM and T1 network links between the head office and regional offices.
4. Use Open Replicator incremental offline push to distribute rate information to the branch offices
using T1 network links.
Answer: D

Tagged with:
 
0 Comments
Leave A Response

EMC Storage and Information Infrastructure Exam

On February 11, 2009, In E20-500, By admin

Killtest Practice Exams for E20-500 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your Implemenation exam and get your Implemenation Certification.
We guarantee your success in the first attempt. If you do not pass the Implemenation E20-500 (EMC Storage and Information Infrastructure Exam) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

killtest E20-500 Downloadable.
Printable Exams (in PDF format) Our Exam E20-500 Preparation Material provides you everything you will need to take your Implemenation exam. The Implemenation Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get Implemenation exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first Implemenation exam try, but also save your valuable time .

  • Comprehensive questions with complete details about E20-500 exam.
  • E20-500 exam questions accompanied by exhibits.
  • Verified Answers Researched by Industry Experts and almost 100% correct.
  • Drag and Drop questions as experienced in the Real Implemenation exam.
  • E20-500 exam questions updated on regular basis.
  • Like actual Implemenation Certification exams, E20-500 exam preparation is in multiple-choice questions (MCQs).
  • Tested by many real Implemenation exams before publishing.

29. When using TimeFinder/Snap, which method is used for copying data from the VDEV to the save
device?
A. Copy On First Access (COFA)
B. Copy On First Write (COFW)
C. Copy On Request
D. Precopy
Answer: B
30. Your customer is very security focused and wants assurances that data will be protected against
unauthorized access. This customer is specifically concerned about WWN spoofing. Which Symmetrix
feature protects against such attacks?
A. Access pools
B. SID_lockdown
C. Solutions Enabler
D. SymACL
Answer: B

Tagged with: •
 
0 Comments
Leave A Response

EMC Implemenation E20-500 Exam (15)

On February 6, 2009, In E20-500, By admin

killtest E20-500 Downloadable.
Printable Exams (in PDF format) Our Exam E20-500 Preparation Material provides you everything you will need to take your Implemenation exam. The Implemenation Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get Implemenation exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first Implemenation exam try, but also save your valuable time .

  • Comprehensive questions with complete details about E20-500 exam.
  • E20-500 exam questions accompanied by exhibits.
  • Verified Answers Researched by Industry Experts and almost 100% correct.
  • Drag and Drop questions as experienced in the Real Implemenation exam.
  • E20-500 exam questions updated on regular basis.
  • Like actual Implemenation Certification exams, E20-500 exam preparation is in multiple-choice questions (MCQs).
  • Tested by many real Implemenation exams before publishing.
  • Try free Implemenation exam demo before you decide to buy it in http://www.Killtest.com.

High quality and Value for the E20-500 Exam:100% Guarantee to Pass Your Implemenation exam and get your Implemenation Certification.

27. A customer has developers that work on large files, which they share out to the rest of the company.
The customer currently uses a Celerra NSX to store and share the large files. Recently, the developers
have complained that they need more bandwidth to the Celerra to access the files they work on, because
it takes too long to open large files. Which Celerra feature solves both sharing and bandwidth challenges?
A. CIFS
B. MPFS
C. NFS
D. NMFS
Answer: B
28. A large enterprise customer is interested in purchasing a new DMX3
to implement iering in a Box.
The customer’s storage team has formal chargeback processes based on the tier of storage consumed,
such that Tier 1 costs the most and Tier 4 costs the least comparatively:
The customer’s storage team is concerned that the lines of business that consume storage will opt for the
cheaper tier of storage because it’s on the same array as Tier 1. The storage team needs a strategy to
create tier differentiation. In addition to various drive densities and multiple RAID types, what options are
available to help the customer with this initiative?
A. Dynamic Cache Partitioning and Symmetrix Priority Controls
| English | Chinese(Traditional) | Chinese(Simplified) | 11
KillTest
Information Co., Ltd. All rights reserved.
B. Performance Manager and Symmetrix Priority Controls
C. Symmetrix Optimizer and Performance Manager
D. Symmetrix Priority Controls and Dynamic Disk
Answer: A

Tagged with: • • •
 
0 Comments
Leave A Response

EMC Implemenation E20-500 Exam (14)

On February 5, 2009, In E20-500, By admin

25. How many copies of a BCV volume can be made at one time with Open Replicator?
A. 4
B. 8
C. 16
D. 32
| English | Chinese(Traditional) | Chinese(Simplified) | 10
KillTest
Information Co., Ltd. All rights reserved.
Answer: C
26. Your customer has multiple EMC storage arrays that it is consolidating. The customer needs the ability
to move primary volumes between different storage arrays while the application remains online. Which
Invista feature meets the customer requirement?
A. Inband
storage virtualization
B. Continuous Remote Replication
C. Open Replicator
D. Dynamic Volume Mobility
Answer: D

E20-500：please download E20-500 in PDF format Demo

100% Guarantee to Pass Your Implemenation exam and get your Implemenation Certification.
We guarantee your success in the first attempt. If you do not pass the Implemenation E20-500 (EMC Storage and Information Infrastructure Exam) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

killtest E20-500 Downloadable.
Printable Exams (in PDF format) Our Exam E20-500 Preparation Material provides you everything you will need to take your Implemenation exam. The Implemenation Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get Implemenation exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first Implemenation exam try, but also save your valuable time .

Tagged with: • • •
 
0 Comments
Leave A Response
« Previous Entries
Go To Top »